Description
Fender Melamine Stratocaster/Telecaster String Nut, Pre-Slotted – Features & Prices in Saudi Arabia :
Fender Melamine Stratocaster/Telecaster String Nut, Pre-Slotted
Item Weight
0.32 ounces
Product Dimensions
1.69 x 0.15 x 0.15 inches
ASIN
B00FW773LA
Item model number
0994404000
Date First Available
September 24, 2013
Color Name
Cream
Material Type
Brass
Size
0
Test video – Fender Melamine Stratocaster/Telecaster String Nut, Pre-Slotted :
Product highlights :
Questions & Answers – Fender Melamine Stratocaster/Telecaster String Nut, Pre-Slotted :
Technical specifications – Fender Melamine Stratocaster/Telecaster String Nut, Pre-Slotted :
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
H. A (verified owner) –
Worked like a charm – I put this on the old fender with a little wood glue. Restrung it and was up and jamming in no time. Of course after the wood glue set.
G. N (verified owner) –
Not bad for not bone – I needed a nut for a knock off strat that broke. I tried a non-name brand that stated it was for a strat or tele. The thing needed so much sanding and when I finally got it to fit it snapped. So I decided to try this nut. It needed a little bit of sanding and it slid right in. Go for the few extra $$ and get a fender brand if you have to replace the nut on a fender guitar.
T. L (verified owner) –
It’s not bone! – I ordered this accidentally and thought I had ordered something else, they’ll just hang on my wall as an ornament or maybe hang then on my Christmas tree. They just won’t make on my build ups, but they’re fine ok ish.
L. N (verified owner) –
Prefect! – Prefect fit. If you have a neck Slot that is cut to Fender specs these nuts pop right. They are cut a few mm wide to allow you to sand the nut down to a prefect blend for your neck width.
G. N (verified owner) –
Not bad for not bone – I needed a nut for a knock off strat that broke. I tried a non-name brand that stated it was for a strat or tele. The thing needed so much sanding and when I finally got it to fit it snapped. So I decided to try this nut. It needed a little bit of sanding and it slid right in. Go for the few extra $$ and get a fender brand if you have to replace the nut on a fender guitar.
A. O (verified owner) –
Pretty good when you short on time and/or money – Fixed my Standard Stratocaster(MIM) with a minimum of time required for fitting, so handy, and I’m happy. I know that the material isn’t bone, but I needed something that I could install myself so I didn’t have to spend money taking it to a shop, and that wouldn’t take an afternoon that I didn’t have to spend for me to fit it. Sounds like the original, which is pretty good IMO.
J. F (verified owner) –
It was almost perfect to begin with – Dropped right into my vintage 52 hot rod tele. The sides had about .1mm overhang so I took 400 grit paper and made a few passes on each side. I carefully checked to make sure I did not take off too much. It was almost perfect to begin with.
R. A (verified owner) –
Excellent – Excellent
H. A (verified owner) –
Worked like a charm – I put this on the old fender with a little wood glue. Restrung it and was up and jamming in no time. Of course after the wood glue set.
L. N (verified owner) –
Prefect! – Prefect fit. If you have a neck Slot that is cut to Fender specs these nuts pop right. They are cut a few mm wide to allow you to sand the nut down to a prefect blend for your neck width.
A. O (verified owner) –
Pretty good when you short on time and/or money – Fixed my Standard Stratocaster(MIM) with a minimum of time required for fitting, so handy, and I’m happy. I know that the material isn’t bone, but I needed something that I could install myself so I didn’t have to spend money taking it to a shop, and that wouldn’t take an afternoon that I didn’t have to spend for me to fit it. Sounds like the original, which is pretty good IMO.
T. L (verified owner) –
It’s not bone! – I ordered this accidentally and thought I had ordered something else, they’ll just hang on my wall as an ornament or maybe hang then on my Christmas tree. They just won’t make on my build ups, but they’re fine ok ish.
J. F (verified owner) –
It was almost perfect to begin with – Dropped right into my vintage 52 hot rod tele. The sides had about .1mm overhang so I took 400 grit paper and made a few passes on each side. I carefully checked to make sure I did not take off too much. It was almost perfect to begin with.
R. A (verified owner) –
Excellent – Excellent
A. K (verified owner) –
It comes a little thicker than oem so you can shave it to fit your instrument – Telecaster guitar
A. K (verified owner) –
It comes a little thicker than oem so you can shave it to fit your instrument – Telecaster guitar