Description
Fender Stratocaster Tremolo Arm Tips – Aged – Features & Prices in Saudi Arabia :
Fender Stratocaster Tremolo Arm Tips – Aged White
Item Weight
0.352 ounces
Product Dimensions
11.42 x 7.48 x 3.54 inches
Country of Origin
USA
ASIN
B0025P9OB4
Item model number
0994933000
Is Discontinued By Manufacturer
No
Date First Available
April 6, 2009
Color Name
Aged White
Test video – Fender Stratocaster Tremolo Arm Tips – Aged :
Product highlights :
Questions & Answers – Fender Stratocaster Tremolo Arm Tips – Aged :
Technical specifications – Fender Stratocaster Tremolo Arm Tips – Aged :
Purchase advice :
-
Warranty :
Check the duration of the warranty and also the faults and defects it covers. Is it complete or limited? and What is included in the warranty (parts, repairs or both)?
-
Shipping :
Is delivery offered? And how long does it take to get delivered (Delivery time)
-
Proof of purchase :
Does the shop give you an invoice ?
-
After-sales service :
Do they have an after-sales service to have information about the installation or operation (instructions for use). Also in case of problem, it is the seller who takes charge or you must contact the manufacturer or supplier yourself.
_____________________________
E. O (verified owner) –
A pair of genuine Fender parts. – So you want to change the tip on your tremolo arm? Can’t find a YouTube video on it? Neither did I.
I. K (verified owner) –
May be genuine, but doesn’t fit – This may be a genuine fender replacement part, but it does not fit a mad-in-mexico trem arm. The hole is slightly too narrow. I was able to get mine on by very carefully using a drill to widen the hole, but only after messing up and destroying one. Still gave two stars because it does match the aged white of other plastic parts on my strat.
J. I (verified owner) –
Fender – Worked out well !
E. O (verified owner) –
A pair of genuine Fender parts. – So you want to change the tip on your tremolo arm? Can’t find a YouTube video on it? Neither did I.
T. I (verified owner) –
Installation – Like the other reviews said, it is tight and difficult to install. If you have trouble getting the old one off, I would recommend applying some heat. I did this by holding it over the gas burner on my stove for a few seconds and using some pliers to pull it off, but this will likely destroy your old tip. I was able to get the new tip started on the whammy bar, but could not slide it on no matter how much pressure I applied. I decided to boil some water and let the whammy bar and tip soak in it for a few minutes. After doing this, I applied some pressure on the whammy bar by pushing down on my counter top and the tip slide right on. Hope this helps.
M. G (verified owner) –
Perfect replacement – Perfect replacement for Fender MIM tremolo arms. These are the correct ones.
R. R (verified owner) –
Does not fit MIM trem arms 🙁 – I ordered this as the description lists it fits a variety of arms, but it was far too tight of a fit for mine, which is a standard mim. Looks great it just won’t go on.
R. R (verified owner) –
Does not fit MIM trem arms 🙁 – I ordered this as the description lists it fits a variety of arms, but it was far too tight of a fit for mine, which is a standard mim. Looks great it just won’t go on.
I. K (verified owner) –
May be genuine, but doesn’t fit – This may be a genuine fender replacement part, but it does not fit a mad-in-mexico trem arm. The hole is slightly too narrow. I was able to get mine on by very carefully using a drill to widen the hole, but only after messing up and destroying one. Still gave two stars because it does match the aged white of other plastic parts on my strat.
H. N (verified owner) –
Poor fit for my ’97 American Strat – Too small of a diameter from Fender. Used heat, lubricant, purchased again after damage. Still not perfect.
J. I (verified owner) –
Fender – Worked out well !
T. I (verified owner) –
Installation – Like the other reviews said, it is tight and difficult to install. If you have trouble getting the old one off, I would recommend applying some heat. I did this by holding it over the gas burner on my stove for a few seconds and using some pliers to pull it off, but this will likely destroy your old tip. I was able to get the new tip started on the whammy bar, but could not slide it on no matter how much pressure I applied. I decided to boil some water and let the whammy bar and tip soak in it for a few minutes. After doing this, I applied some pressure on the whammy bar by pushing down on my counter top and the tip slide right on. Hope this helps.
F. R (verified owner) –
They worked for me – I bought these to ass length to a Wilkenson Trem Bar.
H. N (verified owner) –
Poor fit for my ’97 American Strat – Too small of a diameter from Fender. Used heat, lubricant, purchased again after damage. Still not perfect.
M. G (verified owner) –
Perfect replacement – Perfect replacement for Fender MIM tremolo arms. These are the correct ones.
F. R (verified owner) –
They worked for me – I bought these to ass length to a Wilkenson Trem Bar.